Smart Solutions in Pump Systems...
POYAN ENGINEERING
In Pump Systems
Smart Solutions...
Our services
Wide Product Range
POYAN ENGINEERING
Wide Product Range
Our services
Building Services
POYAN ENGINEERING
Building Services
Our services
Wastewater Applications
POYAN ENGINEERING
Wastewater Applications
Our services
Pressurization
POYAN ENGINEERING
Pressurization
Our services
Fire Fighting Pumps
POYAN ENGINEERING
Fire Fighting Pumps
Our services
Poyan Engineering
Products
Check out our products defined by their brands.
  • Grundfos
  • General Pumps - Poyan Engineering
CIM/CIU
CIM/CIU
The Grundfos fieldbus concept is the ideal solution for efficient control of pumps and pump systems.
Review
AMD, AMG, AFG
AMD, AMG, AFG
Mixers and flowmakers ensure that solid particles are evenly dispersed in wastewater and sludge, preventing sedimentation and supporting treatment processes.
Review
Control MPC
Control MPC
Grundfos Control MPC allows you to monitor and control up to six pumps of the same type connected in parallel with the CU 351 controller.
Review
DP
DP
Grundfos DP pumps; It is designed for the transfer of wastewater and groundwater from installations in homes, farms and small industrial facilities.
Review
Grundfos GO
Grundfos GO
Grundfos GO has been developed for professional users who need portable solutions
Review
SQ
SQ
Grundfos SQ 3″ submersible pumps are designed to offer a wide performance range so you can find the best solution for your needs.
Review
Conex DIS-G
Conex DIS-G
Conex® DIS-G (Dosing Instrumentation Standard-Gas) safety solutions are designed to monitor gas dosing systems and gas tanks.
Review
CMV Package Booster
CMV Package Booster
They are pressurization systems consisting of multi-stage vertical centrifugal pumps.
Review
BMET System
BMET System
The Grundfos BMET booster module consists of a BME and a BMT pump connected in series.
Review
DMX
DMX
The Grundfos DMX series has proven its success in dosing applications worldwide.
Review
Hydro Multi-E
Hydro Multi-E
Hydro Multi-E is a booster system with innovative technology designed especially for building service applications.
Review
MP204
MP204
MP 204 is an electronic motor protector designed for the protection of asynchronous motors or pumps.
Review
LC-LCD
LC-LCD
LC/LCD controllers are often used in pits with one (LC) or two (LCD) pumps in commercial buildings, private properties and urban wastewater networks.
Review
HS
HS
Horizontal split-body Grundfos HS pumps are single-stage, non-self-priming centrifugal solutions with the shaft bearing on both sides.
Review
BMEX
BMEX
The Grundfos BMEX water purification system is used to desalinate seawater or brackish water.
Review
Conex DIA-G
Conex DIA-G
Conex® DIA-G (Dosing Instrumentation Advanced-Gas) security solutions are designed to monitor gas dosing systems and gas tanks.
Review
Grundfos DMH - Poyan Engineering
Grundfos DMH - Poyan Engineering
The Grundfos DMH series is extremely powerful and stable in applications requiring reliable dosing and high pressure capacity, such as process engineering.
Review
Conex DIS-C
Conex DIS-C
The Conex® DIS (Dosing Instrumentation Standard) solutions are cost-effective, simple units that function as measurement and control.
Review
Multilift
Multilift
MULTILIFT wastewater lifting stations, suitable for buildings of different sizes, are complete systems designed to transfer wastewater below the sewer level and allow wastewater to reach the sewer system easily.
Review
DW
DW
Portable Grundfos DW are durable submersible pumps with a vertical discharge port.
Review
SEG
SEG
Grundfos' SEG grinder pump range is specially designed for the transfer of sewage and untreated wastewater in small or sparsely populated areas where sewage systems are not available or gravity sedimentation systems are not suitable.
Review
Grundfos Remote Management
Grundfos Remote Management
Grundfos Remote Management; commercial buildings, water supply networks, wastewater facilities, etc. They are secure systems accessed over the internet, designed to monitor and manage pump installations in locations.
Review
Hydro Multi-S
Hydro Multi-S
Grundfos Hydro Multi-S booster systems consist of two or three identical Grundfos CM, CMV or CR pumps connected in parallel and mounted on a common chassis, a motor-protected control cabinet and an integrated controller.
Review
KPL
KPL
The PL axial flow pump is designed to provide high flow at low head.
Review
Sololift2
Sololift2
SOLOLIFT2, consisting of unique compact type waste water transfer stations, performs the drainage of all kinds of hygiene systems in your homes without being dependent on the gravity drainage system.
Review
Alpha2
Alpha2
Further developed with proven Grundfos technologies, the new ALPHA2 small circulation pump is unrivaled in energy efficiency and is an unmatched choice for cooling, heating and air conditioning applications where fluids up to +2°C are transferred.
Review
NB, NBG, NBE, NBGE
NB, NBG, NBE, NBGE
Grundfos NB/NBG are non-self-priming centrifugal single-stage pumps; It has horizontal shaft with axial suction and radial discharge mouth. The NB/NBG series consists of rigid coupling pumps, the main dimensions of which comply with EN733 or ISO2858 stand
Review
NK, NKG, NKE, NKGE
NK, NKG, NKE, NKGE
Grundfos NK/NKG are non-self-priming centrifugal single-stage pumps; It has horizontal shaft with axial suction and radial discharge mouth. This series consists of long-coupled pumps, the main dimensions of which comply with EN733 or ISO2858 standards.
Review
JP Booster
JP Booster
The pump is suitable for fixed installation thanks to its durable design. The pump arm made of composite material, which can be customized according to the needs, is attached longitudinally.
Review
MQ
MQ
The MQ pump is a compactly designed solution that supplies water to agriculture and gardening as well as domestic applications. MQ is suitable for the transfer of drinking and rain water.
Review
SES-195 Selcoperm
SES-195 Selcoperm
Selcoperm are electrolytic chlorination systems that produce hypochlorite solution using electricity from sodium chloride (table salt) solution. No significant by-products are formed in this process.
Review
Vaccuperm VGB & VGA
Vaccuperm VGB & VGA
The gas dosing systems Vaccuperm VGB and VGA are designed to safely and accurately dose gaseous chlorine. This series offers a measuring range of up to 10,000 g/h chlorine.
Review
CM, CME
CM, CME
As a horizontal multistage pump, the CM stands out with its compact and modular design. Thanks to these two features, many different configurations can be applied on the pump.
Review
BME
BME
The Grundfos BME solution is a multistage submersible pump integrated in a stainless steel sleeve. The pump is powered by a standard electric motor via a V-belt pulley.
Review
CUE
CUE
CUE frequency converters are used to control the speed of many pumps produced by Grundfos.
Review
Hydro Fire
Hydro Fire
It is produced with electric or diesel engine as UL/FM approved or VDS approved in accordance with NFPA 20.”
Review
EF
EF
Grundfos EF pumps are designed for use in the transfer of wastewater from households (other than toilet waste).
Review
CMV
CMV
While designing the vertical type multistage CMV pump, compactness and modularity were the two most important factors to consider. Thanks to this design, it is possible to customize the pump according to user needs.
Review
SE 1.1-11 kW
SE 1.1-11 kW
The pumps in the SE series are designed to provide years of trouble-free performance. It can be operated in submersible or dry installation without engine cooling, it is extremely reliable and very easy to maintain.
Review
Conex DIA-1, DIA-2, DIA-2Q
Conex DIA-1, DIA-2, DIA-2Q
Conex® DIA (Dosing Instrumentation Advanced) series is designed for users who do not have any prior knowledge of the products.
Review
S Pump
S Pump
S pumps are the most important part of many sewage systems. In addition to its strength and durability, it is also preferred because of its innovative features such as the impeller clearance adjustment system SmartTrim and the leakage prevention function
Review
SP
SP
Grundfos SP submersible pumps stand out in the range with their high efficiency and reliable performance. The most advanced technology is used in hydraulic designs.
Review
SPO
SPO
SPO submersible pumps are especially designed for use in domestic water supply. Offered in two basic versions, the SPO can be installed dry or (liquid) immersed, depending on the user's needs.
Review
GT Expansion Tanks
GT Expansion Tanks
Available in different sizes from 8 liters to 3000 liters, GT tanks are suitable for vertical installation. GT tanks from 24 to 80 liters can be installed both vertically and horizontally.
Review
Grundfos JP - | Poyan Engineering
Grundfos JP - | Poyan Engineering
The JP is a self-priming single-stage centrifugal pump. The pump body has an axial suction port and a radial discharge port. An ejector with guide vanes is integrated into the pump to take maximum advantage of its self-priming feature.
Review
DDC
DDC
The DDC is packed with impressive features such as an easy-to-use control button with a simple design and a graphic LCD display with over 25 languages.
Review
SE and SL Pump
SE and SL Pump
The SE and SL series of wastewater pumps are the solutions offering the highest overall efficiency on the market.
Review
Hydro MPC
Hydro MPC
High standards have been observed in the design of Grundfos Hydro MPC booster systems.
Review
DPK
DPK
DWK and DPK are submersible pumps designed for dewatering and drainage applications. The cast iron design and hydraulic construction increase the durability and efficiency of the pumps.
Review
Liftaway
Liftaway
Grundfos LIFTAWAY is a compact wastewater lifting station designed for gray wastewater applications.
Review
HYDRO Test Fire Water Boosters
HYDRO Test Fire Water Boosters
“It is a fire group consisting of vertical-stage pumps.”
Review
Unilift CC
Unilift CC
Unilift CC is a single-stage, submersible drainage pump designed for the transfer of drainage water and gray waste water. With the filter removed, Unilift CC can pump up to 3 mm water level above the ground.
Review
Unilift AP
Unilift AP
Unilift AP is a single-stage pump designed using a semi-open impeller (AP12) or a vortex impeller (AP35 and AP50). Unilift AP pumps have a stainless steel sleeve that acts as a cooling during operation.
Review
DDE
DDE
The DDE is a low-cost, entry-level model with all the benefits of Digital Dosing, including a maximum measuring range of 1:1000 and trouble-free, continuous dosing.
Review
DME
DME
Grundfos DME Digital Dosing pumps combine excellent dosing accuracy with ease of use, dosing large volumes from 60 l/h to 940 l/h in just a few versions.
Review
DIT-L, DIT-M Photometer
DIT-L, DIT-M Photometer
Grundfos portable DIT photometers have all the advantages of a complex stationary photometer. Thanks to its easy use, it makes fast and reliable photometric measurements of up to 14 parameters in water treatment processes.
Review
Dedicated Control
Dedicated Control
The Grundfos Dedicated Control system consists of modules with electrical connections installed in the control cabinet and easier to install, or individual modules suitable for local integration.
Review
BMP
BMP
Grundfos BMP is a piston pump capable of transferring liquids under high pressure. Since its design is based on the axial piston principle, it is extremely light and compact.
Review
CR, CRI, CRN High Pressure pumps
CR, CRI, CRN High Pressure pumps
Designed to meet virtually any industrial application, the basic CR pump range offers the widest range of pump solutions on the market.
Review
UN
UN
Grundfos high pressure booster modules are used for pressurization, fluid transfer and circulation in systems under high static pressure.
Review
KWM Mixed Flow Pump
KWM Mixed Flow Pump
The KWM mixed flow pump is designed to provide high flow at medium head.
Review
Grundfos Comfort
Grundfos Comfort
Grundfos COMFORT pumps are designed specifically for domestic hot water systems in single-family homes or two-family buildings. There are spherical motors in the pumps.
Review
CRT
CRT
It is a multistage vertical in-line centrifugal pump made of titanium material.
Review
CME Booster
CME Booster
CME Booster supplies water at constant pressure for many domestic applications. Thus, the changes in water pressure caused by the increase/decrease in demand or the stop/start state of the pump do not affect the end user.
Review
MTR, SPK, MTH, MTA
MTR, SPK, MTH, MTA
MTR, SPK, MTH, MTA pumps are vertical type multistage centrifugal solutions designed for the transfer of oils used in cooling machine tools, condensate transfer and similar applications.
Review
OCD-162 Oxiperm Pro
OCD-162 Oxiperm Pro
The use of chlorine dioxide as a disinfectant is one of the most ideal ways to obtain clean drinking water.
Review
Unilift KP
Unilift KP
Unilift KP are submersible drainage pumps designed for both temporary or unsupported permanent installation. It can be used for the transfer of drainage water or gray sewage. Installation in collection tanks is also possible.
Review
SRP
SRP
Grundfos recirculation pump series are solutions produced with years of engineering experience. Designed for low head and high flow rates, SRP pumps can be easily used in wastewater treatment plants and flood control.
Review
DWK
DWK
DWK and DPK are submersible pumps designed for dewatering and drainage applications.
Review
Conex DIS-C
Conex DIS-C
The Conex® DIS (Dosing Instrumentation Standard) solutions are cost-effective, simple units that function as measurement and control.
Review
Conex DIS-G
Conex DIS-G
Conex® DIS-G (Dosing Instrumentation Standard-Gas) safety solutions are designed to monitor gas dosing systems and gas tanks.
Review
DDA
DDA
The DDA model is the ideal solution for complex and demanding applications where the process needs to be executed in the most reliable way.
Review
SL 0.9-11 kW
SL 0.9-11 kW
The SL series was developed to optimize the performance of your system, minimize known risk factors and reduce maintenance needs.
Review
DIP
DIP
Although DIP (Dosing Instrumentation Pool) was originally designed for swimming pool applications, it is also used in water treatment applications today.
Review
BME, BMET
BME, BMET
Grundfos BME are multistage submersible pumps integrated in a stainless steel jacket. It is powered by a standard electric motor via a V-belt pulley. Belt pulley bearing has automatic lubrication and cooling system.
Review
DDA
DDA
The DDA model is the ideal solution for complex and demanding applications where the process needs to be executed in the most reliable way.
Review
TP, TPE
TP, TPE
Grundfos vertical inline pumps TP and TPE can be used in many applications. This series consists of single-stage, in-line centrifugal pumps powered by standard motors and mechanical seals.
Review
Magna3
Magna3
Consisting of small, medium and large sized circulation pumps, the MAGNA3 series includes communication equipment, permanent magnet designed electronic speed control and compact stator motor technology.
Review
magna1
magna1
MAGNA1 circulation pumps are responsible for circulating liquids in variable flow heating systems where the pump duty point must be optimized to reduce energy costs.
Review
Vertical Multistage Jocey Pumps (GCR Series)
Vertical Multistage Jocey Pumps (GCR Series)
The GCR series are non-self-priming, vertical inline multistage centrifugal pumps.
Review
CEPREVEN / UNE Standard Fire Pumps
CEPREVEN / UNE Standard Fire Pumps
The motors are equipped with dynamically balanced cast aluminum squirrel cage rotors.
Review
Centrifugal End Suction Pumps (FGBS SERIES)
Centrifugal End Suction Pumps (FGBS SERIES)
General Pumps offers the FGBS series of state-of-the-art fire pumps with diesel engine or electric engine, single engine End Suction pump.
Review
Horizontal Split Casing Pumps (FGHC Series)
Horizontal Split Casing Pumps (FGHC Series)
General Pumps offers the FGHC series diesel engine or electric motor driven, state of the art horizontal split casing fire pumps.
Review
Poyan Engineering
Poyan Engineering
Smart Solutions in Pump and Fire Extinguishing Systems...
Poyan Engineering aims to ensure that systems that have proven their economic benefits in the world are also used in our country, that maximum benefit from these developments and that investment budgets are used correctly with our experience.
Corporate
consultancyand Supervision
Sales
and Installation
APPLICATION
Technical service
01. Service
consultancyand Supervision

Consultancy-Supervision

We ensure the dissemination of knowledge and experience by sharing our knowledge and experience that we have continuously developed in Pump and Fire Extinguishing Systems for every project we operate.

Using our years of experience in Pump and Fire Extinguishing Systems, instead of conventional standard solutions in our projects We offer different solutions that provide maximum efficiency.

Contact Us Now
02. Service
Sales
and Installation

As a supplier company in Pumps and Fire Extinguishing Systems, we offer the best brands in our industry to our customers to be used in your projects, in line with our belief that the concept of supplier should definitely include engineering-based service.

Our company meets the needs of end users and/or implementing companies with competitive price, strong stock, fast return, fast supply and shipment understanding. We adopt the philosophy of excellence in service, not only during sales but also in after-sales services regarding the products sold. We serve our customers by going out.

Contact Us Now
03. Service
APPLICATION

We meticulously carry out mechanical and electrical application works in our projects with our expert engineering and field teams in Pump and Fire Extinguishing Systems. In accordance with international standards, by combining the mechanical installation projects, contracting, consultancy and service services of industrial facilities, shopping malls, civil, official, commercial facilities, hotels, banks, educational institutions and concept works with sustainable energy and eco construction strategies and techniques. We provide services.

In the strategic project planning process, we determine planning and design principles with employers, investors, the public or designers depending on national and international sustainability criteria, and we determine targets. We carry out our projects in line with the determined targets. While we are carrying out our projects, we offer the industry's leading products with the highest quality and all relevant certificates to our customers.

Contact Us Now
04. Service
Technical service

Our service team, based on a 24/7 working principle, provides immediate on-site intervention if needed. In addition, we ensure that our systems operate safely for many years in accordance with the maintenance agreements. we're getting ahead of it.

Contact Us Now
Unilever
American Hospital
Tasıgo
Siegwerk
Regnum
Belleuve
carousol
Coca Cola
Defacto
Başarı Holding
Ayaz Yün
Asat
Aromsa
Akmerkez
Kıırkkale Üniversite
JTI
Metro
Eczacıbaşı
Family Mall
Petrol Ofisi
Msb
Mercede Benz
Memorıal
Marriot
Marmaray
İga
Karaca
İller Bankası
Hollanda
Ford Otosan
Dinarsu